Grepcor Diamonde Inc

Abbott

ARCHITECT c4000

The ARCHITECT c4000 clinical chemistry analyzer demonstrates high-quality testing results and rapid STAT turnaround time. The ARCHITECT c4000 enhances laboratory productivity and provides users high confidence in clinical results.

The ARCHITECT c4000 offers a maximum throughput of up to 800 tests per hour. Featuring a load-up capacity of 100 samples with 35 priority positions, the ARCHITECT c4000 allows for up to 90 refrigerated reagent positions on board, plus Integrated Chip Technology (Na+, K+ and Cl-).

For in vitro diagnostic use only.

Product Specification
Methods	Photometric, Potentiometric, Turbidimetric
Maximum Throughput	Up to 800 tests/hour
Sample Types	Serum, Plasma, Whole Blood, Urine, CSF
Sample Tubes	Height: 72-102 mm Diameter: 9.6-16.1 mm
Sample Cup	Yes (50 µl dead volume)
Sample Capacity	100
Sample Barcode Types	Code 39, Codabar, Interleaved 2 of 5, Code 128
Sample Result Storage	50,000
Sample Volume	1.5-35 μL, Average: 7.2 µL
Automatic Dilution	Yes
Sample Probe Carryover	<1000 ppm WB to WB ≤0.1 ppm WB to Serum
Reagent Capacity	Up to 90 refrigerated positions plus patented ISE (Na+, K+ and Cl-)
Reagent Type	>97% liquid ready-to-use
Reagent Onboard Stability	5-65 days, Average: 38 days
Calibration Frequency	1-60 days, Average: 25 days
Sample, Clot and Bubble Detection	Yes
Reagent Pressure Monitoring	Yes
Sample Interference Measurement	Yes: Hemolysis, Icterus, and Lipemia
System Control Center	1 SCC, with color touchscreen monitor, keyboard and mouse
Onboard Maintenance Records	Yes
Online Error Code Help	Yes
Host Interface	Bidirectional, serial RS-232 interface, host query option available
Remote Diagnostics	AbbottLink
Dimensions(H x W x D)	49" x 63" x 36" 125.1 x 160 x 90.7 cm
Weight	1,132 lbs 513.5 kg
Electrical Requirements	AC 180-264V, 47-63 Hz, 20 amp
Water Requirements	Deionized water 15 liters/hour during normal operation, 25 liters/hour maximum
Heat Output*	3050 BTU/hr, running mode
Sample Loading	RSH
Download Brochure	c4000

Arkray

ADAMS A1C HA 8190V

New Standard for HbaA1c Testing

High Speed: Fast mode measurement in 24 seconds and variant mode in just 58 seconds

User-friendly: Seamless transition between fast and variant modes shortens the overall TAT

Sophisticated: Separation and detection of variant hemoglobin are programmed as standard functions

Precise: Accurate measurements with CV less than 1%

Two modes with shorter TAT

Measurement speed in Variant mode becomes now fast enough for routine resting. First screening of a patient is recommended in Variant Mode

Variant Mode: 58 seconds.

Fast Mode: 24 seconds.

Product Specification
Samples	Whole blood or hemolysis sample
Measurement items	HbA1c (stable HbA1c), HbF (In Variant mode, Hbs and HbC can be separated and HbE and HbD cab be detected)
Measurement principle	Reverse-phase cation exchange chromatography
Measurement wavelength	420nm/500nm (Dual-wavelength colorimetry)
Dimensions W x D x H (mm)	530 x 530 x 530
Weight	Anlyzer: Approx 41kg Sampler unit: Approx 4kg
Download Brochure	HA-8190

Arkray

ADAMS A1C HA 8380V

A fully automated HbA1c glycated hemoglobin analyzer that uses the Gold Standard High Performance Liquid Chromatography method. This undisputed fastest HbA1c analyzer can give results in as fast as 100 seconds. The detailed measurement made with the ADAMS A1c Lite are accurate because high resolution peaks of stable and labile HbA1c are provided. Hemoglobin variants such as carbamylated Hb and acetylated Hb are eluted separately from stable HbA1c peak thus allowing an interference free testing.

Compact size

Compact and small size with full function and performance.

Product Specification
Samples	Whole blood or hemolysates
Measured items	HbAlc(Stable HbAlc), HbF
Measurement principle	HPLC method (Reversed-phase cation exchange chromatography)
Detection method	Dual-wavelength colorimetry (wavelengths measured: 420nm/500nm)
Resolution	0.1% Ratio, Immol/mol
Measurement range	HbAlc : 3-20%, 9-195mmol/mol, HbF : 0-100%
Throughput	Variant mode:160 seconds per sample Fast mode: 100 seconds per sample
Sample volume	Approx.4µL(whole blood)
Sample container	Blood collection tube (12.3 or 15mm diameters x 75 to 100mm length)
Sampling method	Cap-Piercing
Rack	5 samples/rack
Measurement conditions	10-30°C > 20-80%RH (No condensation)
Display	20 digits X 2 lines LCD
Built-in Printer	Thermal printer, 58mm thermal paper
Sample loading capacity	A maximum of 10 samples
Power supply	AC100V-240V ±10% 50/60HZ
External dimensions	330(W) x515 (D) x485 (H)mm
Download Brochure	HA-8380

Thermo Fisher

INDIKO | INDIKO PLUS

Thermo Scientific™ Indiko™ series, Indiko and Indiko Plus, are fully automated random access bench-top systems for clinical and specialty chemistry testing. Analyzer, reagents and consumables form a reliable, fully supported system solution offering to the laboratory ease of use and time saving automation that supports routine daily work. The Indiko systems offer optimal operational excellence for small and medium sized laboratories.

Automated daily start-up procedures
Any mix of sample cups and bar-coded primary tubes can be loaded at the same time
Automated clot detection
Versatile automated dilution features
Reflex testing capability offers savings in operator time
Built-in real-time QC program
Automated real-time monitoring of the reagent usage and expiry date
Full traceability of calibration and reagent lot data
Bi-directional LIS connection

Product Specification
	Indiko	Indiko Plus

Capacity	Photometric tests/hour: up to 200 ISE tests/hour: up to 120	Photometric tests/hour: up to 350 ISE tests/hour: up to 135
On-Board Sample Capacity	Max 90 with 5 x 18-pos. sample rack and 1 x 6-pos. reagent rack	Max 108 with 6 x 18-pos. sample rack
On-Board Reagent Capacity	Max 30 with 1 x 9- or 18-pos. sample rack and 5 x 6-pos. reagent rack	Max 42 reagent positions
Walk-away Time	Up to 2 hours	Up to 3 hours
Water Consumption	1.5 liter / hour	2.5 liter / hour
Dimensions (WxDxH) & Weight	75 cm x 70 cm x 62 cm / 130 cm with the open cover & 85 kg 29,5 in x 27,6 in x 24,4 in/ 51 in with the open cover & 187 lbs	94 cm x 70 cm x 62 cm / 130 cm with the open cover & 110 kg 37 in x 27,6 in x 24,4 in/ 51 in with the open cover & 242 lbs
Download Brochure	Indiko Analyzers
Reagents	Thermofisher Oy Reagents

Radiometer

ABL 9

Making the Complicated Simple

Blood gas testing is an important asset for any modern hospital that wants to diagnose and treat critical ill patients. With accurate blood gas analysis you are able to diagnose and treat critically ill patients with confidence.

So, imagine if you as a doctor had direct access to a clever blood gas analyzer. Imagine it being both easy to use and able to deliver fast and reliable test results on 9 critical parameters using only 70 μL of blood. That’s what we imagined at Radiometer, and why we developed the ABL9 blood gas analyzer.

To simplify your daily operations we made the clever simple – and affordable!

Product Specification
Touch screen	Tablet-like touch screen Highly intuitive interface On-screen step-by-step user guidance
Inlet	Self-cleaning function Embedded light for easy sample introduction Two positions for syringes and capillary tubes
Sensor cassette	9 parameters from 70 μL of blood Choice of 15 to 600 test cassettes Proven thick-film sensor technology
Performance specs	Sample volume: 70 μL Measuring time: 77 sec, 9 measured parameters and 28 derived parameters
Weight	<7kg
Download Brochure	ABL 9

Radiometer

ABL 90 FLEX ANALYZER

Faster: More time for patient care

The ABL90 FLEX offers automatic sample mixing in just seven seconds and full acute care panel results in only 35 seconds. That is only about a third of the time you would spend on other compact analyzers, giving you more time for patient care.

Better: Accuracy and regulatory compliance

The quality management system on the ABL90 FLEX automatically measures on three dedicated aqueous QC solutions. Continuous system and analysis checks are run to ensure accuracy and reliability of results. Automated corrective actions can be viewed in the analyzer’s activity log providing full regulatory compliance.

Now time is on your side

When time is of the essence, turn to the ABL90 FLEX blood gas analyzer. Designed specifically for demanding hospital wards like the ICU, the NICU and the ED, the ABL90 FLEX analyzer is quickly ready for the next sample.

In just 35 seconds, our cassette-based ABL90 FLEX analyzer can deliver 17 parameters from a sample as small as 65 μL. Ensure standardized mixing of your blood samples using safePICO syringes and the built-in sample mixer on the ABL90 FLEX analyzer.

Compliance is straightforward when you work with an ABL90 FLEX analyzer. Automatic quality control with dedicated QC solutions comes built-in to the analyzer which also runs continuous system analysis checks, and takes automated corrective actions when necessary.

Simpler: Easy to use and maintainScalability and renowned Radiometer quality

The ABL90 FLEX is a plug-and-play solution. Testing is a quick, intuitive three-step process and maintenance is just as easy. Putting in a new sensor cassette and solution pack is the only maintenance needed, taking no more than a few seconds.

Product Specification
Type	Parameter	Units	Range of Indication
pH	pH	pH Scale	6.3 – 8.0
Blood gas	pCO2	mmHg; Torr	5 – 250
	pCO2	kPa	0.67 – 33.3
	pO2	mmHg; Torr	0 – 800
	pO2	kPa	0 – 107
Electrolyte	cK+	mmol/L	0.5 – 25
	cK+	meq/L	0.5 – 25
	cNa+	mmol/L	7 – 350
	cNa+	meq/L	7 – 350
	cCa2+	mmol/L	0.1 – 9.99
		meq/L	0.2 – 19.98
		mg/dL	0.4 – 40.04
	cCl-	mmol/L	7 – 350
	cCl-	meq/L	7 – 350
Metabolite	cGlu	mmol/L	0 – 60
	cGlu	mg/dL	0 – 1081
	cLac	mmol/L	-0.1 – 31
		meq/L	-0.1 – 31
		mg/dL	-1 – 279
Reagents
Capillary Test Inlet Sensor Cassette Packaging Sensor Cassette Replacement Sensor Cassettee Solution Pack SP90 Paper Roll
Download Brochure	ABL 90 Flex

Radiometer

ABL 90 FLEX PLUS ANALYZER

Get 19 critical parameters on one tiny blood sample

The ABL90 FLEX PLUS blood gas analyzer is designed for point-of-care testing in busy clinical environments, such as the ED, ICU, NICU or the delivery room where fast results from a very small blood sample are vitally important to make critical diagnostic decisions.

The ABL90 FLEX PLUS analyzer gives you reliable results in only 35 seconds on 19 parameters – blood gas, electrolytes, metabolites and co-oximetry – from a syringe, capillary tube or test tube.

All on one blood sample of only 65 µL.

This extended panel of critical parameters within blood gas testing gives you more clinical insight here and now, allowing you to act on results and make life-saving diagnostic decisions.

Product Specification
Type	Parameter	Units	Range of Indication
pH	pH	pH Scale	6.3 – 8.0
Blood gas	pCO2	mmHg; Torr	5 – 250
	pCO2	kPa	0.67 – 33.3
	pO2	mmHg; Torr	0 – 800
	pO2	kPa	0 – 107
Electrolyte	cK+	mmol/L	0.5 – 25
	cK+	meq/L	0.5 – 25
	cNa+	mmol/L	7 – 350
	cNa+	meq/L	7 – 350
	cCa2+	mmol/L	0.1 – 9.99
		meq/L	0.2 – 19.98
		mg/dL	0.4 – 40.04
	cCl-	mmol/L	7 – 350
	cCl-	meq/L	7 – 350
Metabolite	cGlu	mmol/L	0 – 60
	cGlu	mg/dL	0 – 1081
	cLac	mmol/L	-0.1 – 31
		meq/L	-0.1 – 31
		mg/dL	-1 – 279
Oximetry	sO2	%	-2 – 102
	sO2	fraction	-0.02 – 1.02
	ctHb	g/dL	-0.48 – 27.7
		g/L	-4.8 – 277
		mmol/L	-0.30 – 17.2
	FO₂Hb	%	-2 – 103
	FO₂Hb	fraction	-0.02 – 1.03
	FCOHb	%	-2 – 103
	FCOHb	fraction	-0.02 – 1.03
	FMetHb	%	-2 – 103
	FMetHb	fraction	-0.02 – 1.03
	FHHb	%	-2 – 102
	FHHb	fraction	-0.02 – 1.02
	FHbF	%	-25 – 121
	FHbF	fraction	0.25 – 1.21
	ctBil	μmol/L	-20 – 1000
		mg/dL	-1.2 – 58.5
		mg/L	-12 – 585
Download Brochure	ABL 90 Flex Plus

Radiometer

ABL 800 FLEX ANALYZER

Now time is on your side

Radiometer ABL 800 Flex is a fully-automated, benchtop ABG analyzer which offers comprehensive panel of 18 critical parameters in as fast as 80 seconds per sample. Equipped with most advanced liquid-based membrane technology, ABL 800 Flex improves turnaround time to results at maximized uptime with its automatic quality control and calibration. The system can be readily connected to any hospital data management system and allows quick life-saving decisions for patients in acute care departments.

Product Specification
Number of ampoules in carousel :	0 – 20
Positioning of ampoules in carousel :	Random
Lot change :	2 lots of same level at the same time possible
Liquid volume in ampoule :	700 μL
Expiration of ampoules :	24 months at 25 °C / 77 °F (including 15 days at up to 32 °C / 90 °F )
Conditioning time (from room temperature) :	15 min with filled carousel
Scanning time :	< 30 sec with filled carousel
Cycle time :	< 2 min 40 sec
Manual QC measurement possible :	yes
Remote control :	Remote monitoring and start of measurement via the RADIANCE system
Reagents
Gas 1 & Gas 2 FLEX FLEXQ Syringes Containers Rinse Disposable Calibrate Ampoules red-green-blue-yellow AutoCheck5+ Ampoules Level3 QualiCheck5+ Ampoules Level3 AutoCheck6+ Ampoules Level3 AutoCheck5+ Ampoules Boxes Level 1-3 QualiCheck5+
Download Brochure	ABL 800 Flex

Abbott

ALINITY CI SERIES

The Alinity ci-series consists of compact, scalable systems to maximize throughput and efficiency, making today’s high-performing laboratories run at their best, today and into the future.

UNIFORMITY

Enable a truly harmonized healthcare system

FLEXIBILITY

Respond to the changing needs of the market and your community with the right capital investment

OPERATIONAL PRODUCTIVITY

Leverage lab technology and data to redefine and improve operational productivity

CONFIDENCE

Quality test results can save lives and reduce the financial impact to your hospital system

Product Specification
	Alinity c	Alinity i	Alinity ci
System Dimensions (HxWxD)	134 x 119 x 117 cm/1.39 m²	134 x 119 x 117 cm/1.39 m²	134 x 199 x 117 cm/2.33 m²
Methods	Photometric, Potentiometric	Chemiluminescence	Photometric, Potentiometric, Chemiluminescence
Maximum Throughput	Up to 1350 TPH	Up to 200 TPH	Up to 1550 TPH
Throughput/m²	Up to 971 TPH/m²	Up to 144 TPH/m²	Up to 665 TPH/m²
Scalability	Up to 4 modules controlled by one System Control Module (SCM)
Continuous Access of Reagents, Calibrators, Controls and Consumables	Yes
Flexible Stat Options	Prioritize single rack as needed or configure multiple fixed positions
Sample Types*	Serum, plasma, urine, cerebrospinal fluid, hemolysate, whole blood	Serum, plasma, whole blood, urine	Serum, plasma, urine, cerebrospinal fluid, hemolysate, whole blood
Sample Capacity	150	150	300
Sample Bar Code Types	Code 128, Standard Code 39, Interleaved 2 of 5, Codabar
Sample Result Storage	200,000
Dead Volume	50 μL (sample cup)
Sample Volume*	1.5–35 μL	2–200 μL	Alinity c: 1.5–35 μL Alinity i: 2–200 μL
Sample Probe Carryover	≤0.1 parts per million†
Reagent Capacity	Up to 70 refrigerated reagent cartridges onboard plus patented ISE (Na+, K+, and Cl-)	Up to 47 refrigerated reagent cartridges onboard	Up to 117 refrigerated reagent cartridges onboard plus patented ISE (Na+, K+, and Cl-)
Reagent Type	100% liquid ready-to-use
Reagent Onboard Stability*	5–60 days	15–30 days	For Alinity c: 5–60 days For Alinity i: 15–30 days
Automated Onboard Calibrators and Controls*	Yes	Yes (controls only)	Alinity c: Yes Alinity i: Yes (controls only)
Calibration Frequency*	1–60 days	15–30 days	For Alinity c: 1–60 days For Alinity i: 15–30 days
Sample, Clot and Bubble Detection	Yes
Reagent Pressure Monitoring	Yes
Sample Interference Measurement	Yes; hemolysis, icterus, and lipemia	No	Yes; hemolysis, icterus, and lipemia (CC only)
On Board Maintenance Records	Yes
Online Error Code Help	Yes
Host Interface	HL7 or ASTM
Remote Diagnostics	AbbottLink
Weight	712 Kg	624 kg	1160 kg
Electrical Requirements	SCM: 90–264 V, 16 amp Each Instrument: 180–264 V, 16 amp
Water Requirements	Average: 27 L/hr Max‡: <30 L/hr	Average: <10 L/hr Max‡: <30 L/hr	Average: ≤37 L/hr Max‡: <60 L/hr
Heat Output (processing)	Average 2005 Btu	Average 1634 Btu	Average 3639 Btu
Noise Level (1 m)	Alinity c: 55.9 dBA Alinity i: 63.4 dBA
Laboratory Automation Connection	ACCELERATOR a3600
Download Brochure	Alinity c	Alinity i	Alinity ci

Abbott

ARCHITECT i1000SR

The ARCHITECT i1000SR immunoassay analyzer meets your laboratory’s high standards by delivering STAT results when you need them. The flexible protocols built into the ARCHITECT i1000SR enhance laboratory workflow and allow you to report results with confidence.

For in vitro diagnostic use only.

Enhanced System and Assay Dynamics

CHEMIFLEX technology with flexible assay protocols provides excellent low-end sensitivity and expanded dynamic ranges
New patented wash cup design and wash algorithm effectively control sample carryover(<0.1 ppm tube to tube)
Pressure differential technology enables detection of clots, bubbles and insufficient sample volume to reduce analytical error and improve patient safety

The benefits: certainty and confidence in the clinical results

Product Specification
Methods	CHEMIFLEX
Maximum Throughput	Up to 100 tests/hour
Sample Types	Serum, Plasma, Whole Blood, Urine
Sample Tubes	Height: 72-102 mm Diameter: 9.6-16.1 mm
Sample Cup	Yes (50 µl dead volume)
Sample Capacity	65
Sample Barcode Types	Code 39, Codabar, Interleaved 2 of 5, Code 128
Sample Result Storage	50,000
Sample Volume	10-150 μL, Average: 62 µL
Automatic Dilution	Yes
Sample Probe Carryover	≤0.1 parts per million
Reagent Capacity	25 refrigerated positions
Reagent Type	100% liquid ready-to-use
Reagent Onboard Stability	14-30 days
Calibration Frequency	Calibrate with new lot number, if controls are out of range or if specified otherwise within the package insert
Sample, Clot and Bubble Detection	Yes
Reagent Pressure Monitoring	Yes
Sample Interference Measurement	No
System Control Center	1 SCC, with color touchscreen monitor, keyboard and mouse
Onboard Maintenance Records	Yes
Online Error Code Help	Yes
Host Interface	Bidirectional, serial RS-232 interface, host query option available
Remote Diagnostics	AbbottLink
Dimensions(H x W x D)	49” x 59” x 30” 124.5 x 149.9 x 76.2 cm
Weight	636 lbs 288 kg
Electrical Requirements	AC 110-120V or 200-240V, ±10%, 50 or 60 Hz self-adjusting
Water Requirements	Purified water to dilute buffer concentrate
Heat Output*	2400 BTU/hr, running mode
Sample Loading	RSH
Download Brochure	i1000

Radiometer

AQT90 FLEX

Accelerate patient flow with point-of-care testing

Point-of-care testing (POCT) provides a significant reduction in turnaround times, has the potential to improve patient care, workflow efficiency, and mitigate overcrowding in the emergency department.

With the AQT90 FLEX analyzer’s closed tube system, ease of use at point of care is taken to the next level.

Automatic pipetting and automatic patient ID look-up mean minimal handling—simply Drop‘n’Go.

Simply insert the collection tube into the AQT90 FLEX analyzer
Get your test results delivered directly through the HIS/LIS system to the medical records

Product Specification
Hardware
Computer Specifications	CPU Onboard Intel® Atom™ E3815 1.46GHz CPU AMI 64Mbit SPI BIOS Intel® Atom™ SoC Integrated Graphics System Memory Onboard 2GB DDR3L 1066/1333 32 GB SolidState storage 8” color TFT-LCD, resolution 800 × 600 SVGA Touch screen 112mm thermal-sensitive printer
Interface	Built-in barcode reader for operator & sample ID Accepted codes: Code 128, Code 39, Code 93, I 2 of 5, Codabar Serial interface RS232 with power for external barcode reader 3 USB 2.0 connections Optional external keyboard Optional external mouse Optional external barcode reader
Software
Software Platform	Microsoft® embedded software
Data Capacity	Patient Results Log: 2500 records Activity Log: 7000 records Calibration Log: 5500 records LQC Log: 2000 records
Security and QA features	Data secured by password protection Lockout feature for QC 7 different user profiles User ID access verification
Communication	LIS/HIS communication High-level protocols: ASTM E1394 , 1381 HL7 ver. 2.2 HL7 ver. 2.5 Low-level serial protocols: Serial RAW Low-level network protocols: TCP/IP Radiometer IT solution Interface via Ethernet adapter
Start-up times
Install solution pack	<10 min.
Install test cartridges	<1 min.
Accessories
Blank cartridge	942-962
Cleaning solution tubes	905-843
Empty tube kit – box of 50 tubes	944-230
Printer paper (8 rolls)	984-070
Solution Pack	903-006
Reagents
Cleaning Solution Tubes Liquid Quality Control Solution Pack Test Cartridge Cartridge Consumables LQC TNT level 1-3 (1)
Download Brochure	AQT90 Flex

Behnk Elektronik

THROMBOTIMER 2 | THROMBOTIMER 4

The principle is simple

Starting

When switched on, the Thrombotimer automatically checks all important functions.

Incubating

Inserting a cuvette with a sample into the incubation position will automatically start the timed incubation process.

Measuring

Upon completion of incubation, the cuvette is placed in the measuring channel. The reagent is then added with any commercial pipette. The system starts upon reagent addition and stops with the coagulation of the sample. All results are automatically calculated and then displayed.

Our specialists for blood plasma

Innovative. Reliable. Maintenance-free.

Every detail is innovative

The opto-mechanical measuring system

A circulating magnet underneath the cuvette causes a steel ball to rotate. This ball optimises the gentle mixing of the sample which results in uniform coagulation. The light source is adjusted according to the sample’s turbidity making it possible to measure even difficult samples reliably. All sensors in the measuring system are protected from becoming soiled.

The incubation

A timer determines the period of incubation. Shortly before the completion of incubation, a red LED flashes. When incubation is complete, the Thrombotimer emits an acoustic signal. The timer can be programmed as needed for each test.

The evaluation

The measuring results are displayed %, INR, Ratio, mg/dl, g/l or seconds. A PC or printer may also be connected to the Thrombotimer.

The service

Since its introduction, the Thrombotimer has proved to be a maintenance-free instrument. Transmission of measuring data to an external system is made possible with the integrated interface.

Product Specification
	Thrombotimer 2	Thrombotimer 4
Measuring Channels	2	4
Incubation Positions	4	8
Reagent Positions	2	4
Double Determination	✔	✔
All Standard Reagents	✔	✔
Processes Calibration Curves	✔	✔
Test-specific Incubation Times	✔	✔
RS232 Interface (PC/Printer)	✔	✔
Operating Voltage	✔	✔
Power Consumption	✔	✔
Dimensions (W x H x L)	✔	✔
Weight	2.2 kg	5 kg
Download Brochure	Thrombotimer
Reagents	Behnk Reagents

Behnk Elektronik

THROMBOLYZER COMPACT X

Practicality and Reliability

Just a few minutes of daily and weekly maintenance are enough to keep the system up and running. That means lower instrument downtime, less lab personnel expenditure of time and higher processing capacity for patient samples. Compact X, like all Thrombolyzer systems, is well known for reliability with very low operating and maintenance costs.

Proven. Tough. Reliable.

The Thrombolyzer Compact X is a fully-automated in vitro coagulation analyzer which delivers high quality results with the reliability of the established Behnk Thrombolyzer series for low and mid-volume labs.

Precision and Correctness

Normal or interference samples are monitored by the system photometer which automatically changes both light intensity and wavelength. This feature, combined with a rotating steel ball amplifies the measuring signal, secures precision and correctness of each result. Results out of specification are automatically repeated; possibly with a different dilution or reflex test.

Productivity and Efficiency

Continuous loading and the on-board capacity of samples, reagents and consumables ensure an uninterrupted workflow and a long walk-away-time. With a maximum throughput of 160 tests/h, the analyzer is suitable for all low and mid-volume labs.

Product Specification
Sample throughput / with Cap piercing	160 tests/h
Security system	Three security levels
LIS Interface	Bi-directional
Power consumption	100 VA
Sound level	65 dB (A)
Dimensions (L x W x H)	56cm x 55cm x 58cm
Weight	27.5 kg
Mains voltage	100 – 240 V
Download Brochure	Compact X
Reagents	Behnk Reagents

Diatron

ABACUS 5

Walk-away Intelligence

The Abacus 5 system is a compact, bench top, 60 test/hour, 5-part WBC differential analyzer. It can be loaded with both open or closed tubes. The Abacus 5 can be enhanced to meet your changing needs by adding a 100 positions autoloader and/or a small sample volume module when low blood volume collection is required.

The Abacus 5 has a large color touch screen with an easy to follow and intuitive user interface. The Abacus 5 is the ideal solution for clinical laboratories looking for a reliable, safe, precise and easy-to-use instrument with the most advanced technology.

Benefits and Key Features

Accurate and Precise Results
Field Upgradeable options
User Friendly and easy to operate
Operator safety
Confidence
Specifically Matched Reagents

Product Specification
Measuring Data	Throughput: 60 tests/hour Parameters: CBC+5 DIFF mode, 2 histograms: RBC, PLT, 2 scattergrams: 4 diff, BASO, 26 parameters: WBC, LYM, MON, NEU, EOS, BAS, LYM%, MON%, NEU%, EOS%, BAS%, RBC, HCT, MCV, RDW-sd, RDW-cv, HGB, MCH, MCHC, PLT, PCT, MPV, PDW-sd, PDW-cv, P-LCC, P-LCR
Measuring Principle	Laser light scatter technology Impedance method for CBC Light absorbance for HGB measurement
Reagents and Sampling System	Sample volume: 110 μl of whole blood Closed and open tube sampling Calibration: automatic or manual Pre-dilute software option for small samples Environmentally friendly Diluent and Cleaner reagents and cyanide-free Lyse
Quality Control	Separate QC database Levey-Jennings graphs
Technical Features	Multilevel user modes with individual identification Data storage capacity: 100,000 records Printout: External printers
Usage	User interface: LCD touch screen (10.4˝) Multilingual user interface: English, French, Croatian, Hungarian, Italian, Polish, Russian, Turkish, Chinese, German, Greek, Argentinian Spanish, Brazilian, Portuguese
Dimensions	Size (Width x Depth x Height) 41 cm x 49 cm x 52 cm 16˝ x 19˝ x 21˝ Weight: 35 kg, 77 lbs
Measuring
Download Brochure	Abacus 5

Hologic

THINPREP GENESIS

Ergonomic benefits

Reduce repetitive strain with automated uncapping/capping
No more hand labeling - optional printers for both tube and slide labeling
Simple and user-friendly touch screen operation
Retire a manual process for your aliquoting needs
Light touch loading of consumables for both the filter and slide

Same sample, more control, greater possibilities

The ThinPrep® Genesis™ processor provides the same trusted reliability as the ThinPrep 2000 system for cytology slide processing, together with molecular aliquoting, chain of custody and ergonomic benefits to give you peace of mind while optimising your lab’s performance.

Standardized processing

Prevent sample mix ups with chain of custody verification
Minimizes manual handling of patient samples
Trusted, controlled membrane filter system

Workflow advantages

Streamline your sample prep with automated sample handling
Convenient and intuitive barcode setup and options
Compact footprint to save space
Maximize throughput by running multiple systems

Intuitive User Interface

Modern touch screen design
Customizable label designer feature
Exportable report generation
Real-time progress tracking

Product Specification
Slide Printer Dimensions	Width: 18 cm Height: 22 cm Depth: 24 cm
Tube Printer Dimensions	Width: 13 cm Height: 15 cm Depth: 32 cm
Dimensions	Width: 48 cm Height: 58 cm Depth: 36 cm
Weight (ThinPrep Genesis)	40 kg (approximate)
Waste bottle	Height: 43 cm Diameter: 15 cm
Barcode support	Vial, tube, and slide label: 1D linear barcodes (Code 128, I2 of 5, Code 39, Code 93, Codabar) 2D DataMatrix and QR Code barcodes (vial and slide) ThinPrep Imager compatible 7/7 OCR for slides
Supported sample types	Gynecological, Non-Gyn (Urine, Mucoid, Body Fluid, Superficial, and Fine Needle Aspiration), and UroCyte
Aliquot volume line	1 ml
Consumables
Gyn Consumables TransCyt Filter Cervical Sampling Device Thin Prep Slide Preservcyt Solution Non-Gyn Consumables Non-gyn fliters ThinPrep Slides (Non-gyn) Cytolyt Solution Preservcyt Vials (Non-gyn) Stains and Special Treatment Solutions Thin Prep Rinse Solution Thin Prep Nuclear Stain Thin Prep Orange solution Thin Prep EA solution Thin Prep Bluing solution
Download Brochure	ThinPrep Genesis

Hologic

THINPREP 5000 PROCESSOR

Intuitive Design

User-friendly touch screen interface for real-time progress tracking and reporting

Ergonomic Benefits

Automated vial uncapping and re-capping
Minimal risk of repetitive strain injuries for operators

Fully automated so you can accomplish more than ever before

The ThinPrep 5000 processor delivers a fully automated slide preparation option for ThinPrep Pap test, Non-Gyn and UroCyte samples. Continuous, hands-free processing of up to 20 samples per batch allows up to 45 minutes of walkaway time.

Walkaway Automation

Continuous, hands-free processing with up to 45 minutes of walkaway time
Carousels can be loaded at accessioning and easily transported
Up to 20 vials, slides and filters can be loaded at once
Processed slides are racked and ready for staining. Output racks can be loaded directly into select stainers and coverslippers

Chain-of-Custody Verification

Barcodes on the vial are automatically matched to the label on the slide, ensuring chain-of-custody is maintained

Product Specification
Instrument Dimensions	Width: 86 cm/34”, Height: 56 cm/22”, Depth: 66 cm/26”
Weight	80 kg/175 lb (approx.)
Waste container	Width: 15 cm/6”, Height: 43 cm/17”, Depth: 15 cm/6”
Operating Temperature	16 – 32°C / 60 - 90°F
Operating Humidity	20% – 80% RH non-condensing
Electrical Voltage	100/130 VAC at 2 amps 220/240 VAC at 1 amp
Frequency	47 – 63 Hz
Power	Maximum 240 watts
Clearances	Width: 94 cm/37”, Height: 109 cm/43”, Depth: 74 cm/29”
Consumables
Gyn Consumables TransCyt Filter Cervical Sampling Device Thin Prep Slide Preservcyt Solution Non-Gyn Consumables Non-gyn fliters ThinPrep Slides (Non-gyn) Cytolyt Solution Preservcyt Vials (Non-gyn) Stains and Special Treatment Solutions Thin Prep Rinse Solution Thin Prep Nuclear Stain Thin Prep Orange solution Thin Prep EA solution Thin Prep Bluing solution
Download Brochure	ThinPrep 5000

Grifols

PROCLEIX PANTHER SYSTEM

Experience Freedom SIMPLE Operation

INTUITIVE, USER-FRIENDLY SOFTWARE

Offers touchscreen simplicity, providing real-time guidance and status updates throughout all functions
Provides both visual and audio assistance through its task-driven interface

SCHEDULED AND AUTOMATED MAINTENANCE

Provides programmable system maintenance and priming during lab’s off hours
Offers real-time inventory supply updates and status messages throughout the day

SIMPLIFIED INVENTORY MANAGEMENT

Reagents maintain 60-hour on-board stability to reduce operator hands-on time
RFID-labeled bottles reduce manual scanning and operator error
Monitors all aspects of reagent, fluid, and consumable inventory including number of remaining tests, expiration dating, and lot numbers

SMART SIMPLE VERSATILE

The Procleix Panther system combines full automation with versatility and smart operations for efficient NAT processing of blood and plasma.

A comprehensive NAT screening solution in a very compact footprint.

Experience Freedom SMART Design

FULLY INTEGRATED, FULLY AUTOMATED NAT

Performs nucleic acid extraction, amplification, and detection all in a single tube

Improves workflow, achieves Lean operating efficiency by saving operator time and steps
Reduces risk of operator error

Features built-in process controls for sample and results integrity
Reagent calibration valid for 24 hours
Senses liquid levels for reagents and samples to ensure correct levels are present for testing
Requires no end of run controls

FAST ACCESS TO REPORTABLE RESULTS

Releases first reportable result in 3.5 hours, then 5 results every 5 minutes

275 results in 8 hours (IDT)
500 results in 12 hours (IDT)

Product Specification
Sample throughput	Standard: 3.5 hr to first result; 5 results every 5 min thereafter IDT: 275 results in 8 hr; 500 results in 12 hr
Sample capacity	120 sample tubes (15 tubes per rack x 8 racks; with continuous sample loading ability)
Sample barcode types	Code 39, Code 93, Code 128 (ISBT 128), NW7, Interleaved 2 of 5, Codabar, JAN-13, UPC
Reagent capacity	1 reagent kit per lane 4 lanes available to load any combination of assay reagents 2000 test on-board capacity Continuous reagent kit loading ability
Waste capacity	Process 750 tests before unloading liquid and solid waste
Dimensions (W x D x H)	Instrument: 122 x 81.5 x 175 cm (48 x 32 x 69 in) UPS (optional): 21.4 x 41.0 x 32.5 cm (8.4 x 161.1 x 12.8 in) Note: touchscreen monitor adds 45.5 cm (18 in) to width
Clearance requirements	Width: 183 cm, minimum (6 ft; recommended space is 244 cm [8 ft]) Vertical: 198 cm (6.5 ft) Front: 91.4 cm (3 ft) Note: touchscreen monitor adds 45.5 cm (18 in) to width
Weight	Instrument: 363 kg (800 lb) UPS: 34.5 kg (76 lb)
Voltage	Instrument: 100-240 VAC (±10%; single phase) UPS: 110 V-20 amp circuit (dedicated), specified to operate at a minimum of 15 amps (dedicated) UPS: 220 V-10 amp circuit (dedicated), specified to operate at 7.5 amps (dedicated)
Frequency	50/60 Hz, single phase
Power	Instrument and ancillaries: 1400 W (peak; 13 amps @ 100 VAC, 5.4 amps @ 240 VAC)
Operational temperature	15-30°C (59-86°F)
Operational humidity	20-85% (relative, non-condensing)
Operational Altitude	≤2000 m (6562 ft; above sea-level)
Heat dissipation	550 W (1878 BTU/hr; during steady state)
Drain output	None; waste fluids drain to removable containers
Noise output	<70 dBA
Download Brochure	Procleix Panther System

Arkray

IDaten AE-4070

The Arkray Aution IDaten AE-4070 is a latest generation semi-automated urine chemistry analyzer designed for fast, reliable urine strip testing in clinical laboratories. It delivers accurate results with automated strip handling and optical reading to reduce manual errors. With a compact footprint and intuitive operation, it integrates easily into routine lab workflows that supports quality and efficiency in urine testing.

Product Specification
Measurement Objects	Urine
Measurement items	GLU, PRO, BIL, URO, KET, pH, NIT, BLD, LEU, S.G., color tone ALB, CRE (calculation items: ALB/CRE ratio, PRO/CRE ratio)
Measurement wavelength	4-wavelength LED (430, 565, 635, and 760 nm)
Measurement principle	Test strip item: Dual-wavelength reflection photometric method (single wavelength for BLD) Color tone: reflectance measurement using a calibration pad
Test strips	AUTION Sticks series AUTION SCREEN Microalbumin/Creatinine Uriflet S 11UA
Reaction time	Approximately 1 minute
Processing speed	514 samples/hour (maximum processing mode: 7-second interval)
Memory capacity	520 samples
Display	7-Inch color LCD with touch panel
Printer	Thermal printer (58 mm width)
External output	RS-232C, Ethernet (optional)
Operating environment	Temperature: 10 to 30° C, Humidity: 20 to 80% R.H. (non-condensing)
Measurement environment	Temperature: 10 to 30° C, Humidity: 30 to 60% R.H. (non-condensing) *Depends on the temperature correction function.
Power requirements	AC adapter: 100 to 240 V AC (usable worldwide)
Power consumption	60VA
Barcode	External hand-held type (D Sub 9 pin)
Dimensions	206 (width) x 365 (depth) < 180 (height) mm
Weight	5.0kg
Download Brochure	Aution IDaten AE-4070

Roche

Roche cobas c303

Simplicity meets excellence

The cobas® c 303 analytical unit combines photometric and ISE testing within a compact footprint of 1.2 square meters. It features 42 cooled reagent positions and supports over 110 clinical chemistry applications, including measurements for specific proteins, enzymes, substrates, electrolytes, drugs of abuse (DATs), therapeutic drug monitoring (TDMs), and Hba1c.

This analytical unit offers access to perform more than 110 different clinical chemistry applications including measurements for proteins, enzymes, substrates, electrolytes, drugs of abuse (DATs), and therapeutic drug monitoring (TDMs). It has a throughput of up to 450 photometric tests per hour and comes with an integrated ion selective electrode (ISE) unit delivering up to 450 ISE tests per hour. In the mixed mode, the throughput is up to 750 tests/hour (450 ISE + 300 photometric tests/hour). The cobas c 303 has 42 cooled reagent positions.

Product Specification
Measurement technology	Photometric and ion-selective electrode
Throughput	Photometric only: 450 tests/hour ISE only: 450 tests/hour (150 samples/hour) Mixed mode Photometric & ISE: 750 tests/hour (300 photometric + 450 ISE tests/hour)*
Sample types	Serum/plasma, urine, cerebrospinal fluid (CSF), supernatant, whole blood for HbA1c, oral fluid, hemolysate, amniotic fluid, processed stool, plasma, serum
Sample pipetting volume	1.0–25.0 μL
Reagents Specification	Reagent pack type: cobas® c pack green Reagent positions: 42 reagent packs Onboard stability: Up to 6 months (assay dependant) Reagent identification: RFID Reagent storage temperature: 5–15 °C Reagent loading/unloading: Manual
Reaction times for tests	3–10 min
Download Brochure	Roche Cobas Pure Integrated Solutions

Roche

Roche cobas c503

Roche Cobas Pro Integrated Solutions

The cobas® c 503 analytical unit delivers efficient clinical chemistry testing, performing up to 1000 tests per hour and featuring 60 reagent positions. Supporting a broad and continuously expanding assay menu of over 110 clinical chemistry parameters, including measurements for specific proteins, enzymes, substrates, electrolytes, drugs of abuse (DATs), therapeutic drug monitoring (TDMs), and Hba1c.

Product Specification
Measurement technology	Photometric
Throughput	Photometric: 1000 tests/hour
Sample types	Serum/plasma, urine, cerebrospinal fluid (CSF), supernatant, whole blood for HbA1c; using S2 probe, hemolysate for HbA1c; using S1 probe, oral fluid, hemolysate, amniotic fluid, processed stool, plasma, serum
Sample pipetting volume	S1: 1.0–25.0 μL S2: 1.3–2.0 μL
Reagents	Reagent pack type: cobas® c pack green Reagent positions: 60 Onboard stability: Up to 6 months (assay dependant) Reagent identification: RFID Reagent storage temperature: 5–15 °C Reagent loading/unloading: Manual
Reaction times for tests	3–10 min
Download Brochure	Roche Cobas Pro Integrated Solutions

Roche

Roche AVL 9180

Electrolyte Analysis You Can Count On

The AVL 9180 Electrolyte Analyzer is intended for in vitro testing of samples of whole blood, serum or plasma, and urine for the quantitative measurement of electrolytes (Na+, K+, Ca2+, and Cl-) and Lithium using electrochemical technologies (potentiometry and amperometry) for aid in diagnosis and in monitoring.

Product Specification
Sample Size	95 μL
Sample Type	whole blood, serum, plasma, urine, dialysate, aqueous stds, QC
Sample Application	syringe, sample cup, collection tube, capillary
Analysis Time	50 sec.
Sample Rate	60 samples/hour without printout; 50 samples/hour with printout
Calibration	fully automatic, 1-point with every sample; 2-point every 4 hours
Data Management	quality control storage: 3 levels, 34 days; calculation of mean, SD and CV
Correlation Factors	user programmable for sample types: blood, urine, dialysate types
Normal Values	flagging of abnormal results; user programmable ranges
Standby Mode	user or automatically controlled
Diagnostic Programs	user-controlled diagnostics with easy to understand messages
Display	dot matrix, 2 lines, 16 characters wide
Printout	built-in, thermal roll printer; 16 characters wide
Languages	on-board; English, German, French, Spanish, Japanese, Italian, Polish
Computer Interface	RS-232C (standard serial port)
Data Link	Interface to COMPACT 2 and 3 Blood Gas Analyzer
Temperature	room temperature, 15°C – 32°C (60°F – 90°F)
Relative Humidity	5% - 95%, non-condensing
Power Requirements	110 – 240 V, 50/60 Hz (self-adjusting) 1.4 Amp Max
Dimensions	H ×W × D: 33.5 × 31.5 × 29.5 cm (13.2 × 12.4 × 12.0 in)
Weight	6 Kgs (13 lbs) approx.
Approvals	CSA
Declaration of Conformity	CE (EN45014)
Download Brochure	Roche AVL 9180

Roche

Roche cobas Pulse

Next-level glucose management. And More.

Roche cobas pulse is a next-generation point-of-care blood glucose management system designed to support fast, confident clinical decision-making at the patient bedside. It combines hospital-grade accuracy with a modern touchscreen interface, enabling seamless workflow across diverse care settings. The system integrates smoothly with hospital and laboratory information systems, supporting real-time connectivity, traceability, and operational efficiency. With its durable design and intuitive usability, cobas? pulse helps healthcare institutions deliver consistent, high-quality glucose management for improved patient outcomes.

The cobas® GLU test strips provide an in vitro diagnostic test that quantitatively measures glucose in venous whole blood, arterial whole blood, capillary whole blood, neonatal heel stick, and neonatal arterial whole blood samples on the cobas® pulse.

Product Specification
Display
Model	Color touch, capacitive
Dimensions	4 in
Screen Resolution	480 x 800 pixel
Camera
Properties	5 MP including flashlight
Barcode Scanner	1D-2D
Connectivity
Wifi (WLAN)	Available 2.4, 5 Ghz (certified 802.11 a/b/g/n/ac (single stream n))
Bluetooth	Available
RFID/NFC	Available
Ethernet	Not available (Access point offered)
Power
Battery Type	.6 V rechargeable (lithium technology), with 3,000 mAh capacity
Battery Life	12 h shift, 1 h charging
Battery Mode	Charging unit, wireless charging
Maintenance
Cleaning	Pre-moistened disinf. cloths / spray
Disinfecting	Pre-moistened disinf. cloths / spray
Dimension
H x W x L	30 x 77 x 210 mm
Weight	390 g (including battery)
Download Brochure	Roche cobas Pulse

Roche

Roche cobas e402

Simplicity meets excellence

Designed for efficiency, the cobas® e 402 analytical unit delivers fast and reliable results within a compact footprint of 1.2 square meters. The unit can perform 120 tests per hour and features 28 onboard reagent positions. It covers a broad range of heterogeneous immunoassay tests using the highly innovative ElectroChemiLuminescence (ECL) technology.

The e 402 analytical unit is a fully automated immunology analyzer for a large array of quantitative and qualitative in vitro tests including cobas e flow tests.

Product Specification
Measurement technology	Electrochemiluminescence (ECL) technology for heterogeneous immunoassays
Throughput	Up to 120 tests per hour
Sample types	Serum/plasma, urine, cerebrospinal fluid (CSF), whole blood, oral fluid, hemolysate, amniotic fluid
Reagents	Reagent pack type: cobas® e pack green Reagent positions: 28 reagent packs Onboard stability: Up to 4 months (assay dependant) Reagent identification: RFID Reagent storage temperature: 5–10 °C Reagent loading/unloading: Manual
Reaction times for tests	9/18/27 min
Download Brochure	Roche Cobas Pure Integrated Solutions

Roche

Roche cobas e801

Roche Cobas Pro Integrated Solutions

Designed to deliver reliable results with speed and efficiency, the cobas® e 801 analytical unit performs up to 300 immunochemistry tests per hour and features 48 onboard reagent positions. It supports a broad range of heterogeneous immunoassay tests using the highly innovative ElectroChemiLuminescence (ECL) technology.

The e 801 module is a fully automated, high throughput immunology analyzer for a large array of quantitative and qualitative in vitro tests including cobas e flow tests.

Product Specification
Measurement technology	Immunochemistry analysis, using ElectroChemiLuminescence (ECL) technology
Throughput	Up to 300 tests per hour
Sample types	Serum/plasma, urine, cerebrospinal fluid (CSF) supernatant, others, whole blood, oral fluid, hemolysate, amniotic fluid, processed stool
Sample pipetting volume	4–60 μL
Reagents	Reagent pack type: cobas® e pack green Reagent positions: Up to 48 reagent positions Onboard stability: Up to 4 months (assay dependant) Reagent identification: RFID Reagent storage temperature: 5–10 °C Reagent loading/unloading: Automatic
Reaction times for tests	9/18/27 min
Download Brochure	Roche Cobas Pro Integrated Solutions

Roche

Roche cobas e411

Peace of mind in Immunology

The Roche cobas e 411 is a fully automated, benchtop analyzer designed for immunoassay testing, specializing in heterogeneous assays using ElectroChemiLuminescence (ECL) technology.

It delivers rapid results, including 9-minute STAT applications, with a throughput of up to 86 tests/hour. It is widely used for critical, fertility, and tumor marker tests in medium-volume laboratories.

The analyzer is optimized for applications in endocrinology, oncology, cardiac monitoring, and infectious disease, providing comprehensive test menus.

Product Specification
System	Fully automated, continuous loading and random access system for immunoassay analysis based on Electrochemiluminescence (ECL) technology. Available as a disk and rack system. System components: Analytical module including touchscreen PC
Test Throughput	Up to 86 tests/hr
Reagent concept	cobas e reagent pack: Ready-to-use reagents Onboard reagent capacity: 18 channels/reagent slots for up to 18 different assays Evaporation protection: Automatic closure of reagent lids
Programmable parameters	Max 60 assays definable via 2D-barcode including all necessary information (programming by loading)
Sample types	Serum, Plasma, Urine and others
Onboard sample capacity	Load/unload capacity: Disk: 30 samples Rack: 75 samples on 15 RD standard 5 position rack Rack types: Routine, STAT, Control, Calibrator STAT handling: Disk: Any unoccupied position on the sample disk Rack: Dedicated STAT port on rack feeder
Sample container types	Primary tubes: 5–10 mL; 16x100, 16x75, 13x100, 13x75 mm Sample cup: 2.5 mL Cups on tube
Sample volume	10 to 50 μL per test, depending on assay protocol
Sample probe	Disposable tips for individual sample to avoid carry over; Sample clot detection; Liquid level detection
Sample barcode types	PDF417, Code 128, Codabar (NW 7), Interleaved 2 of 5, Code 39
System interfaces	Touchscreen PC, RS 232 serial interface, bi-directional Standard PC ports (USB, ethernet, serial etc) for other communication devices
Sample database	2,000 results for routine, STAT and controls
Test methods	Pre-defined assay protocols (sandwich, competitive, titration)
Calibration methods	2-point calibration per lot or per cobas e reagent pack
QC methods	Individual QC; Cumulative QC; Preventive QC after calibrati
Rerun / repeat / reflex	Rerun, repeat and reflex supported
Electrical requirements	Power requirements: 100–120 VAC 50/60 Hz single phase or 200–240 VAC 50/60 Hz single phase Power consumption: 1,000 VA
Water / waste requirements	Water supply: 3l container Water quality: ≤10μS/cm or ≥0.1 mega Ohm, bacteria-free Liquid waste: 4l container with overflow detection or direct drain Water consumption: Approx. 3l for 250 tests/approx. 12 mL/cycle
Regulatory compliance	GS, CE, UL, C-UL, CB-report and certificate
Operating conditions	Ambient temperature: 8 to 32°C (64.4°F to 89.6°F) Ambient humidity: 20% to 80% Noise output: 60 dbA (stand-by mode), 63 dbA (avg. during operation)
Physical dimensions	Width: 120 to 170 cm (disk/rack) Depth: 73 to 95 cm (disk/rack) Height: 56 cm (w/o PC unit) Weight: Approx. 170 kg (disk) and 210 kg (rack)
Download Brochure	Roche cobas e411

Roche

Roche Benchmark GX

Quality, Reliability, and Automated Staining

For laboratories seeking to optimize efficiency and increase scale, the BenchMark GX IHC/ISH system offers a compact solution with a small footprint and proven automation, supporting oncology caregivers in delivering diagnostic confidence.

The BenchMark GX provides a fully automated baking-to-staining workflow, along with the flexibility to run different assays side-by-side.

Product Specification
Automation	Baking, deparaffinization, cell conditioning and staining, including IHC, ISH, SISH, immunofluorescence, multiparameter IHC staining (dual, triple), counter stain and titration
Throughput	Approximately 40 slides in 8 hours (standard IHC samples) Approximately 20 slides in 8 hours (standard ISH samples)
Slide Position Capacity	1-20 slides with independent temperature control for each position
Reagent Capacity	25 Reagent positions
Waste Degradation	One (1) 20L carboy
Download Brochure	Roche Benchmark GX

Roche

Roche Benchmark Ultra

Experience the power of PLUS

The BenchMark ULTRA PLUS system uses an unprecedented, fully-automated workflow for immunohistochemistry (IHC) and in-situ hybridisation (ISH) slide staining to improve turnaround time and decrease touchpoints. With over 200 assays in key disease areas available, including high medical value assays, your lab can remain at the forefront of companion diagnostics and personalised medicine.

Built upon the proven technology of the BenchMark ULTRA system, BenchMark ULTRA PLUS delivers an enhanced lab experience and an optimised workflow with flexible solutions. This easy-to-use solution helps histotechnologists and anatomic pathology laboratories manage activities efficiently and confidently, saving on personnel time and resource costs.

Product Specification
Fully automated	Baking, deparaffinization, cell conditioning and staining, including IHC, ISH, SISH, immunofluorescence, multiparameter IHC staining (dual, triple), counter stain and titration
Slide position	1–30 slides with independent processing/functionality and temperature control for each position
Reagent carousel	35 reagent positions
Slides	25 x 75 mm, 1 x 3 in or 26 x 76 mm positively charged slides
Bulk solutions	Up to 7 different bulk solutions can be changed “on the fly” without process interruption
Waste	Two 20 L carboys, can be changed “on the fly” without process interruption
DI water supply	NCCLS Type II water or equivalent (deionized water)
Temperature control	Ambient to 100°C
Modularity	1 to 4 BenchMark ULTRA PLUS instruments may be controlled from one BenchMark ULTRA PLUS computer system
Configuration	Freestanding
Certifications	EC/EN 61010-1, IEC/EN 61010-2-010, IEC/EN 61010-2-101, IEC/EN 61010-2-081, EN 61326-2-6
Catalog number	N750-BMKU-FS 05342716001
BTU/Hour output	400 BTU/Hr idle, 1000 BTU/Hr running
Room temperature	20°C to 32°C
Humidity	20% - 88% non-condensing
Size (W x D x H)	111 X 89.5 X 150.2 cm
Weight	Instrument with reagents: 387.8 kg full fluids, bulk, reservoirs and UV. Instrument dry: 275 kg
Clearances	Top 42.2 cm Sides 10.2 cm Rear 15.2 cm
Voltage	~100–240V
Current	5-10 Amps
Frequency	50/60 Hz
Download Brochure	Roche Benchmark Ultra

Roche

Roche cobas 5800

Innovation Made Accessible

The cobas® 5800 system makes automation, consolidation, integration and standardisation more accessible than ever before. Roche's proven molecular concept now comes in a compact size, delivering premium performance and value-added utility from a small footprint.

The cobas 5800 system supports an automated and integrated workflow to run polymerase chain reaction (PCR) based nucleic acid testing (NAT) for use by trained professionals in laboratory settings. The cobas 5800 system combines the functionalities of instrumentation, consumables, reagents and data management to provide an efficient workflow from sample processing to result interpretation.

Performance Specification
Time to first results (up to 24 tests)* Subsequent runs (24 tests)	2 hours 30 minutes Every 60 minutes thereafter
Maximum throughput (8 hrs \| 24hrs)*	144 \| 528 tests
Walk-away time*	8 hours
Test format	Plates of up to 24 tests with up to 6 assays per plate Two 24 well thermal cyclers
User interactions	1. Load/unload samples, load reagents and consumables as needed 2. Remove waste (solid and liquid) 3. Review or auto-release results
Support for lab developed tests with the cobas omni utility channel	Develop and automate your own lab developed tests (LDTs) with up to 24 targets per plate Mixed processing of open channel assays** and Roche IVD assays
Sample Capacity	Up to 128 primary or secondary specimen tubes Up to 28 liquid based cytology vials (ThinPrep® PreservCyt Solution) Up to 80 samples loaded in 5-position racks
Reagent capacity	Up to 15 (up to 7,200 tests)
Control mini racks	Up to 16
cobas omni MGP reagent	1 (480 tests)
cobas omni specimen diluent reagent (1 L bottle)*	1 (240 tests)
cobas omni lysis reagent (1 L bottle)	2 (432 tests)
cobas omni wash reagent (4 L bottle)	1 (240 tests)
cobas omni processing plates 24	4 (96 tests)
cobas omni liquid waste plates 24	4 (96 tests)
cobas omni amplification plates 24	8 (192 tests)
Processing tips	3 x 96 (144 tests)
Eluate tips	2 x 96 (192 tests)
Download Brochure	Roche cobas 5800

Roche

Roche cobas 6500

Fully automated urine work area on a modular platform

The Roche cobas 6500 is a fully integrated urinalysis system designed to optimize analytical performance and laboratory workflow in medium to high-volume laboratories. Combining automated urine chemistry and urine sediment analysis within a single scalable platform, it delivers standardized, high-throughput testing with minimal manual intervention. Its advanced digital imaging and rule-based results validation support consistent, reproducible urinalysis results that empowers every laboratory with actionable insights, helping make faster, confident clinical decisions.

Product Specification
System	Modular, analytical system platform, consolidated work area for urine strip test and urine microscopy, expandable and re-configurable on site
Types of modules	cobas u 601 module: urine strip measuring unit cobas u 701 module: urine microscopy measuring unit
Module combinations	Stand-alone: cobas u 601 urine analyzer cobas u 701 microscopy analyzer Urine work area: cobas 6500 urine analyzer series with one cobas u 601 module and one cobas u 701 module
Sample throughput	Up to 240 samples/hour with test strip analysis only Up to 116 samples/hour with microscopy analysis only The throughput (theoretical max) depends on the rate of samples that are processed on the cobas u 701 analyzer
Test parameters	Urine strip analysis Urine microscopy analysis
Consumables	cobas u pack: cassette with 400 strips for urine strip analysis cobas u cuvette: cassette with 400 cuvettes for urine microscopy analysis
Sample input/output	Load/unload capacity: 75 samples (= 15 racks), continuous loading/unloading Rack: 5 position rack, RD standard rack Tray: tray with 15 racks/75 samples, RD standard tray Automatically starts operation after routing, priority or emergency samples loading
Sample container types	Length: 65 - 115 mm. Diameter: 13 - 16 mm. Bottom: round, conical or false
Minimal sample volume	Test strip and microscopy: 2.8 mL Test strip: 2.0 mL Microscopy: 2.0 mL Test strip reduced volume (no measuring cell measurements): 1.5 mL Test strip reduced volume and microscopy: 2.3 mL
Measurement principles	Reflectance photometry: with 4 different wavelengths (465, 528, 560 and 615 nm) Refractometry: SG testing Turbimetry: clarity testing Automated microscopy Automatic image evaluation
Calibration	cobas u calibration strip for urine strip analysis Reference cuvette for urine microscopy analysis
Storage capacity	Test results: up to 10,000 sample test results (including images) QC, photometer calibration, measuring cell calibration and microscope check: up to 300 for each Operator can export all results on the analyzer, including sediment images, QC and calibration results
Electrical requirements	100-125 VAC, permanent connection (+10%, -15%) 200-240 VAC, permanent connection (+10%, -15%) 50 or 60 Hz (± 5%)
Regulatory requirements	IEC 61010-1: 2001 IEC 61010-2-101: 2002 IEC 61010-2-081: 2001 + A1: 2003 UL 61010-1 CAN/CSA C22.2 No. 61010-1-04 +GI1 CAN/CSA C22.2 No. 61010-2-101: 04 CAN/CSA C22.2 No. 61010-2-081-04(R09)
Operating conditions	Ambient room temperature 18 to 32°C (64.4 to 90°F) Relative humidity 30%-80%, non condensing
Download Brochure	Roche cobas 6500

Products of Global Repute

Core Laboratory

cobas c303

cobas c503

AVL 9180

cobas Pulse

HA-8190V

HA-8380V

Indiko

ABL 9

ABL 90 Flex

ABL 90 Flex Plus

ABL 800 Flex

Architect i1000sr

Alinity CI-Series

AQT 90 Flex

cobas e411

cobas e402

cobas e801

Thinprep Genesis

Thinprep 5000

Benchmark GX

Benchmark Ultra

cobas 5800

Thrombotimer

Compact X Analyzer

Diatron Abacus 5

IDaten AE-4070

cobas 6500

Capillary Test Inlet

Sensor Cassette Packaging

Sensor Cassette Replacement

Sensor Cassettee

Solution Pack SP90

Paper Roll

Gas 1 & Gas 2

FLEX FLEXQ Syringes

Containers Rinse Disposable Calibrate

Ampoules red-green-blue-yellow AutoCheck5+

Ampoules Level3 QualiCheck5+

Ampoules Level3 AutoCheck6+

Ampoules Level3 AutoCheck5+

Ampoules Boxes Level 1-3 QualiCheck5+

Cleaning Solution Tubes

Liquid Quality Control

Solution Pack

Test Cartridge

Cartridge Consumables

LQC TNT level 1-3 (1)

Gyn Consumables

Non-Gyn Consumables

Stains and Special Treatment Solutions

Gyn Consumables

Non-Gyn Consumables

Stains and Special Treatment Solutions

Gyn
Consumables

Non-Gyn
Consumables

Gyn
Consumables

Non-Gyn
Consumables